Home network
Plan your Wi-Fi, set up a gateway, connect remotely, and diagnose problems.
-
01
Network
Planning 2.4GHz WiFi Channels 1/6/11 and Multi-Floor Heatmaps
A five-story building with seven APs per floor needs a 2.4GHz channel plan that avoids overlap both horizontally and vertically. This article covers the 1/6/11 principle, per-floor channel tables, the actual Tx power and RSSI threshold settings, and a Python script that labels floor plans with channels using PIL before a walkthrough survey to create a heatmap.
-
02
Linux
Tell a Broken Link from an ISP Outage Before Restarting Anything
A typical watchdog restarts NetworkManager when ping fails, which is wrong half the time because no internet access may mean the ISP is down, not that the adapter has failed. This article distinguishes three states using nmcli, then escalates from gentle recovery to PCI remove and rescan without rebooting the machine.
-
03
Network
Put an Idle VPS to Work with WireGuard — A Complete Client Guide
Turn a VPS you signed up for on an annual plan into a WireGuard hub for accessing your home LAN anytime, without port forwarding — covering app installation, config imports, QR scanning, troubleshooting, and administration
-
04
Network
LAN Access for a Team of 7 Without Open Ports: Cloudflare Zero Trust
A team of 7 needs RDP access to machines on the LAN without opening any ports to the internet — the Cloudflare Zero Trust architecture (WARP + cloudflared), with 3 lessons from implementation: a forgotten IdP setup, Gateway defaults that allow everything, and the default-deny rule people forget most often
-
05
Network
Inventory Switch and AP Ports with SNMP Walk and MAC Tables
You can build your own Layer 2 inventory without a controller or NMS. Write an SNMP walk with pysnmp asyncio to retrieve sysDescr, ifTable, and the bridge FDB, then convert OID indexes back into MAC addresses to find which device connects to which port on which switch.