#CCTV
The NVR Kept Beeping, Then Fell Silent When the Disks Failed
The NVR's all-day beeping was not videoloss as everyone thought. It was ipconflict from cameras using DHCP with conflicting IP addresses. Someone got annoyed and muted the whole unit, so when both disks failed together, there was not a single beep. This article fixes the policy one event at a time through ISAPI.
Set VLANs on a Hikvision Switch Using Its Web UI API
A smart managed switch whose Switch ISAPI endpoints return 403 can still be scripted if you inspect what its web UI sends. This article turns that API into a VLAN configuration script with a dry-run before apply, covering the traps I actually hit, including different field names for reads and writes, CCTV mode forcing 10 Mbps, and a calculated PoE load that exceeds the switch's budget.
Using an NVR to Reach Inaccessible Cameras with ISAPI and SDK
The cameras sit behind the NVR's second interface, and none are directly reachable. This article works through what the NVR's ISAPI can actually do, with 26 of 38 tested endpoints working, retrieves CCTV snapshots and RTSP through the NVR, finds when each channel last recorded, and falls back to HCNetSDK through ctypes to read device logs when ISAPI runs out of options.
Auditing CCTV Directly with ISAPI and ffprobe RTSP, Bypassing the NVR
The NVR screen only tells you a camera is online. It does not tell you its model, how old its firmware is, or the actual stream resolution. In this article, I write a script to query ISAPI deviceInfo on each camera directly, then use ffprobe to read values from the actual RTSP stream to build an inventory and check the health of the camera system I maintain.
Read Device Uptime Without SNMP/SSH/API Using TCP Timestamps
Many IP cameras, door controllers, and embedded devices have no SNMP, SSH, or API for querying uptime. But if they return TCP timestamps, I can read their boot time remotely without logging in even once.
MDES 2564 Government CCTV Price Limits and a Hikvision PoE BOM
Read the full MDES June 2564 government CCTV reference pricing and basic specifications before setting a budget, then design a Hikvision IP/PoE BOM that meets the minimum specifications, reference price ceilings, 30-day recording retention rule, and requirement to allow at least 3 brands to compete.